Easy Plas moisture-proof putty series is a building surface material, which is made of cement, selected fine aggregate and polymer additives. It is divided into three types: moisture-proof, strong and elastic putty, which are single-component and two-component.

Features:

1. Non-toxic and harmless, in line with health and environmental protection requirements; easy to construct, can be used with water

2. Can be hand wiped or machine spray, improve efficiency; good construction performance, easy to level, low adhesion to the tool, long operation time

3. It has wide application surface and compatibility with cement base surface, and has good affinity and water resistance;

4. High adhesion, weather resistance, no cracking, peeling, powder

Technical Parameters:

Executive standard: GB/T-23445-2009, JG/T 298-2010

Packing specification engineering equipment: 25kg/bag.

Color: white, gray and color

Water consumption: 37~39%

Density: 1000-1300kg/m3 (dry)

Reference dosage: 1,0~1, 3kg/m2/mm thick (the substrate must be flat, excluding loss)

Thickness: 1~2mm

Construction temperature: 5 ° C -35 ° C

Construction time: ~2h

Bonding strength: ≥0, 5~0, 8MPa@28 days (single component)

                 ≥0,8~1, 3MPa@28 days (strong putty)

Application: Suitable for surface decoration and treatment of indoor and outdoor walls, suitable for concrete and cement plaster base surfaces, lightweight aerated concrete blocks and other surface materials, but not for painted walls; Easy plas Strong putty is suitable for tile mosaic, marble, plaster, building brick and concrete base in renovation project. It can completely cover the gap on the original surface and provide a flat new base. Easy plas elastic putty is flexible and suitable for wood board. Splint material This product is an environmentally friendly material.