EasyPlas/EasyMix floor series are divided into ground hardening powder. self-leveling and easy leveling.

Ground hardening powder

Easy plas series ground hardening powder is made up of selected aggregates. special cements and polymer additives. After being constructed and treated with freshly poured structural concrete. it can form a layer of dense and rust-free wear-resistant on the foundation concrete. Damage layer.

Features:

1. Bodybuilding method. integrated with the base

2. Good slip resistance. strong waterproof ability

3. High wear resistance. resistant to traffic and mechanical wear

4. Simple construction. long service life. economical and practical

5. High impact strength. resistance to point load. no sand. no cracking

6. Easy to clean. rich in color. with a variety of color options

7. Chemical resistance. non-flammable

8. Odorless. non-toxic

Technical Parameters:

Dosage: 4~6kg/m2

Color: natural. red. green. light gray. etc.

Compressive strength: >70MPa @28 days

Flexural strength: >8MPa @28 days

Wear resistance: 10 times better wear resistance than concrete

Mohs hardness: 7~8

Packing: 25kg / bag 40kg / bag

Uses: Widely used in factory warehouses. parking lots. plazas. docks. exhibition centers. hospitals. maintenance centers. etc.

EasyPlas self-leveling

The Easyplas self-leveling series introduces German high-tech technology and is factory-built in China. It is a floor material specially developed for the ground to be leveled or pasted with other materials. It has high fluidity. strong adhesion to plain ground. and is resistant to pressure and wear.

Features:

1. Simple construction. directly stirring with water/liquid additives;

2. Self-leveling. with fluidity. thickness from 3 to 5mm can automatically flow;

3. After hardening. not easy to crack. will not produce delamination. expansion phenomenon. high strength. good wear resistance;

4. The surface is flat. the activation time is fast. the working hours are shortened. and the walking time can be 3-4 hours;

5. Rich in color. a variety of color choices; after 12-24 hours of completion. you can do the surface layer paving. the old tile floor can be laid directly.

Technical Parameters:

Specific gravity: ~1. 65kg / liter

Reference dosage: 5~8kg/m2

Mixing ratio. powder: leeches 100:22~24 (single component)

Compressive strength: ~25MPa (underlying. under I ayment) / ~ 40MPa (surface over layment)

Powder (see the packaging for each type of water): liquid additive ≈3. 6:1 (two-component)

Shrinkage: -0. 15%~+0. 15%

Bonding strength: ≥1. 0MPa

Wear resistance:<1g

Opening hours: 20~30min

Initial condensation @25°0<2 hour s

Final condensation @25°0<4 hour s

Product packaging: 20kg / bag

EasyPlas easy to level mortar

EasyPlas easy-leveling mortar is a special thickness floor material with a thickness of 10~25mm. good fluidity and strong adhesion to plain ground. Yi Shiping is an ideal flat base for covering materials such as carpets. floor tiles and floors.

If you use an easy Shibao self-leveling. you can achieve more decorative effects.

Features:

1. Can be sprayed. high work efficiency. cost saving. stable quality;

2. Reduce the crack. not easy to crack after hardening. will not produce delamination. expansion phenomenon. high strength;

3. The construction is simple. can be directly stirred with water;

4. It has good fluidity. and the two thicknesses can automatically flow from 10~20mm.

Technical Parameters:

G20: compressive strength (MPa) ≥ 20.0 / flexural strength (MPa) ≥ 4.0 / bond strength (MPa) ≥ 0.6

G40: 40.0/6.0/1.0

Mixing ratio: powder: water = 100: 14~15

Fluidity (BS specification) ≈200mm

Operating time: ~30mins

Reference dosage: ±0. 65kg/m2/mm thick

Product packaging: 25kg / bag

Product applications: shopping malls. parking lots. schools. exhibition halls. hospitals. apartments. walking on foot. hotels and office buildings.