EasyPlas/EasyMix special repair sand and other pulp series contain high-strength repair mortar. cement-based non-shrinkage grout. quick plugging treasure and waterproofing of door and window waterproofing.

High strength repair mortar

EasyPlas/EasyMix high-strength repair mortar is a polymer modified cement-based dry powder material with good water retention and strong adhesion. which can replace cement mortar.

Features:

1. Reduce water sensitivity. high impermeability. and environmental protection;

2. Good flexural and compressive strength. good wear resistance and good work performance;

3. High-strength adhesion. low shrinkage. easy to scrape flat;

4. EasyPlas high-strength repair mortar series with EasyPlas multi-functional emulsion EP Latex 123 diluted with a certain proportion of water. can achieve more results.

Technical Parameters:

Water consumption: 15~17%

Opening time: 40~50min(HB25&HB40)/~30min(HB40HR)

Applicable climate: +5°C~+30°C

Storage time: 12 months storage

Specific gravity: ~1500~1600kg/m3 (stacking)/~2000kg/m3 (mixing)

Compression (28 days): 25~60MPa

Anti-folding (28 days): 7~9MPa

Adhesion force (28 days): 1. 5~2. 0MPa

Applicable thickness: 10~30mm

Packing: 25KG / bag

Product use: Suitable for concrete surface. including structural surface. ground repair materials; widely used in highways and viaducts. airport runways. tunnels. offshore concrete buildings. new and old buildings and other repair materials.

Cement-based non-shrinkage grouting material

The EasyPlas/EasyMix series of non-shrinking syrups are formulated from selected aggregates. specialty cements and high performance additives. It is a cement-based grout with high early strength and high fluidity characteristics with shrinkage compensation.

Features:

1. Shrinkage compensation

2. High early strength

3. High fluidity

4. Environmentally friendly and non-toxic

5. Adjustable construction performance

6. Impact resistance

Technical Parameters:

NSG-GR40 (universal type)

Water addition: 14~15% Strength: 25~30MPa@1D/50~55MPa@28D/NSG-GR60 (structure type)

Water addition: 15~16% Strength: 30~35MPa@1D/60~65MPa@28D/NSG-GR80 (for equipment type)

Water addition: 16~17% Strength: 35~40MPa@1D/75~80MPa@28D

Packing: 25kg / bag

Product use: It is applied to grouting material with fixed repair. structure or equipment installation. It is recommended that the filling grouting gap is 10-75mm thick.

Quick plugging treasure RWP8#

feature of product:

1. Easy to use. fast and efficient. with water to stop leaking. a block of instant;

2. It has excellent characteristics such as non-toxic. harmless. anti-corrosion and anti-aging.

Product packaging: 1kg / bag 5kg / bag

Technical Parameters:

JC900-2002

Setting time: initial setting min / final setting min≤

Compressive strength. MPa: 1h ≥ / 3d ≥

Flexural strength. MPa: 1h≥/3d≥

Impermeability pressure difference. MPa 7d≥: coating

Impermeability pressure MPa 7d≥: test piece

Bond strength. MPa 7d.

Heat resistance 100 ° C. 5h

Freeze-thaw cycle (-15 ° C + 20 ° C). 20 times

Retarding type (I): ≥10/360/13.0/3.0/0.4/1.5/1.4/no cracking. peeling. shedding

Rapid setting (II): ≥2~<10/15/4.5/15.0/1.5/4.0/1.5/1.2/No cracking. peeling. shedding

Product use: Suitable for tunnels. basements. pools. dams. mines. water pipes. toilets. roofing. etc.; suitable for all kinds of plugging and water stopping and emergency repair and reinforcement projects.

Door and window waterproof pouring clay

Easymix DV2050 door and window waterproof infusion clay is a dry blend made of special cement aggregate and high performance additive. It is a kind of cement-based infusion mortar with waterproof and shrinkage compensation function with high early strength and high fluidity. The door hole and window cover are filled and filled. and the glue gun can be used for construction. which is time-saving. efficient and professional. so as to solve the common problem of window sleeve leakage.

Features:

◇ Shrink Shrinkage compensation

◇ Impermeability

◇ high early strength

◇ Perfusion Filling glue gun construction

◇ High flow regime

◇ Time-saving. efficient. professional and environmentally friendly

Technical Parameters:

Project: Technical indicators

Setting time min: initial setting ≧120

Bleeding rate%: ≦1.0

Fluidity mm: ≧160

Expansion rate%: 1 day ≧ 0.020

Compressive strength MPa: 1 day ≧ 5; 3 days ≧ 10; 28 days ≧ 15;

Impermeability MPa: ≧0.8

Product construction tools and maintenance processes: