Yi Shibao liquid type products are divided into four types: primer, one-stop multi-functional emulsion, wall-solid and stone preservation agent/sealing waterproofing agent.

Primer

Easy Plas Primer is a water-based polymer with ultrafine particles. It has good adhesion to inorganic materials such as cement and excellent permeability, which can increase the adhesion between layers and layers of cement materials. The back cover of the porous surface avoids the rapid loss of moisture due to the substrate during the construction of the cement mortar and affects the quality.

Features:

1. Because it is a water-based agent, it is directly coated after dilution with water, which is easy to construct and has anti-alkaline properties;

2. Increasing the adhesion between the layer of cement material and the layer to enhance the adhesion strength;

3. It can improve the empty drum phenomenon that is easy to occur after the layers and layers of new and old cement.

Product packaging: 5kg / barrel 10kg / barrel 20kg / barrel

Applications:

1. It is suitable for the sealing of concrete, cement mortar layer, plasterboard, CFC board and new wall material, and the subsequent reinforcement of layers and layers;

2. The osmosis type is suitable for the smooth concrete wall and the vitrified brick.

One-stop multi-functional lotion EPLATEX 123L

Multifunctional Emulsion Series EPLATEX 123L is a high performance waterborne polymer additive for use in dry mortar products. After mixing with the tile adhesive, dry mortar and cement sand in a certain ratio, it enhances the waterproof and moisture resistance of the mortar and the flexibility deformation ability, reduces the shrinkage rate of the mortar, enhances the aging resistance, freeze-thaw resistance, and effectively enhances the mortar adhesion.

Technical Parameters:

project

Shear bond strength / MPa: 7d / 14d

Tensile bond strength / MPa: untreated (7d / 14d) / water immersion treatment, heat treatment, freeze-thaw cycle treatment

Technical indicators: ≥1.0/≥1.5/≥0.4/≥0.6/≥0.6

Product packaging: 20kg / barrel

Product application: It is suitable for shear wall interface treatment, tile surface renovation and aerated brick interface treatment, which greatly increases the adhesion between mortar layer and base surface.

Wall solid (Penetration type)

EasyPlas' LQ300N is an inorganic and organic composite wall-solid foundation that can be used as a primer for loose ground fixed-line handling.

Product Type and Packaging: LQ 300N 20L/barrel

Stone freshener / seal waterproofing agent

Stone fresheners are used to impregnate mineral building materials to make them water-repellent; "sealing" waterproofing agents are ideal for waterproofing and repairing old walls of mosaics and tiles.

feature of product:

1. The stone freshener has good penetration depth, rapid water repellency, and does not close the pores and does not affect the respiration of the substrate;

2. "Sealed" waterproofing agent has excellent adhesion and scrub resistance, and has a very high stability, will not be damaged by ultraviolet light, acid and alkali, high temperature and so on.

Product type and packaging specifications:

Stone preservation agent: CS 118W/108W 1L/can

Sealing waterproofing agent: CS 503 (elastic) / CS505 (general) 5L / can 10L / can.