EasyPlas BC, ALC, masonry / plastering mortar series is a cement-based dry powder material which is made of high-quality cement, selected fine aggregate and polymer additives. It is directly used for thin layer or thick plaster on the inner and outer walls. It has strong crack resistance and has certain impermeability products. The products are divided into common type and anti-seepage and anti-cracking type.

Features:

1. Non-toxic and harmless, in line with health and environmental protection requirements

2, the construction profile, add water to use, improve efficiency

3, good bonding strength, good adhesion with different base layers, overcoming empty drums, cracking, etc.

4, wide application, compatible with all kinds of base surface, weather resistant new strong, no cracking, peeling

Technical Parameters:

Executive standard: GB/T 25181-2010

Packing specification engineering equipment: 20kg/bag, 40kg/bag

Color: white, gray

Construction temperature: 5 ° C -35 ° C

Dry density: 1300~1500kg/m2

Construction time: ~1h

Drying time: ~24h

Opening hours: 20~30min

Water consumption: 15~17%, add 6~6, 8kg per 40KG bag (please refer to the dosage for details)

Reference dosage: 15KG/m2/10mm thick (the substrate must be flat, excluding loss)

Thickness: 5~10mm, 10~20mm

Compressive strength: >=5~25MPa@28 days Bond strength: >=0,6~1, 0MPa@28 days

Compressive strength: >=10MPa@28 days Bond strength: >=0,6~1, 0MPa@28 days

Impermeability type: >=0, 6MPa

Application: The product is suitable for interior and exterior walls, lightweight bricks, ceramsite bricks, hollow brick surfaces, autoclaved lime sand brick surfaces, aerated concrete block brick walls and concrete floor materials; can be directly applied to paint, wallpaper, paste Tiles or batches of Easypys moisture-proof putty for better results; can be used as repair materials for small-area cracks, holes and other defects.