Easyplas/EasyMix insulation mortar series are divided into two categories: 1 self-insulation system; 2 insulation system.

Self-insulation System

Steam-pressed concrete (ALC) self-insulation and thermal system

ALC masonry bonding: Adhesive For alc Block Laying

Yi Shimei ALC gas-filled block special masonry bonding mortar is a polymer-modified cement-based dry powder material which is made of cement, selected aggregate and polymer additive. It is specially designed for concrete aerated block. The specially developed binder has good adhesion, water retention and workability, thus ensuring that the best bonding of the blocks is specially applied to the masonry construction of autoclaved aerated block grouting.

Product: ALC 035 masonry binder

Technical Parameters:

Executive standard: GB/T25181-2010

Water retention rate: ≥99%

28d shrinkage (%): ≤ 0, 2

Compressive strength (MPa): ≥5

Quality loss after freezing and thawing (D15)%: ≤5

14d tensile bond strength (MPa): ≥ 0, 4

Strength loss after freezing and thawing (D15)%: ≤25

Storage and packaging: 40KG / bag

ALC thin layer anti-crack mortar

Yi Shimei ALC 510 AC, thin layer anti-crack mortar / thin layer dry mixed plaster anti-crack mortar anti-crack is made of high quality cement, selected fine aggregate and polymer additives and anti-cracking and anti-seepage admixture The cement-based dry powder material is directly used for the thin layer plastering of the inner and outer walls, has strong crack resistance and has certain impermeability. The product is suitable for aerated concrete blocks, walls and other new walls of inner and outer walls. material.

Performance characteristics:

1. The material is light, the same thickness per unit area, less material consumption, can effectively reduce the amount of materials used and material costs

2. Good material and easy to work, excellent construction performance, and quickly improve work efficiency

3. Has a strong adhesion

4. With good water retention

5. Strong crack resistance, effectively control the emptying and cracking of plastering

6. The construction thickness is 5-10mm, reduce the building load, increase the indoor space

7. It has a certain anti-seepage function to improve the overall impermeability and crack resistance of the system.

Technical Parameters:

Executive standard: GB/T25181-2010>

Bulk density (kg/m3): ≤1400

Wet density (kg/m3): ≤1800

Water retention rate%: ≥99

28d shrinkage (%): ≤ 0, 2

Compressive strength (MPa): ≥10

14d tensile bond strength (MPa): ≥ 0, 5

Quality loss after freezing and thawing (D15)%: ≤5

Strength loss after freezing and thawing (D15)%: ≤25

Storage and packaging: 40KG / bag

Thin layer of gray mortar (Special lightweight mortar)

Yi Shimei ALC thin layer batch of gray clay is a polymer modified cement-based dry powder material, which is used instead of rubber mortar and mortar for interior wall plastering. It is suitable for concrete and light aerated concrete walls and other boards. Lightweight material. It can effectively suppress the cracking of the traditional plastering of the inner wall.

Performance characteristics:

1. Light weight, low bulk density, specific gravity less than 1000kg/m3

2. The same thickness per unit area, less material consumption, can effectively reduce the amount of materials used and material costs

3. Good material workability, excellent construction performance, effectively improve work efficiency

4. Has a strong adhesion

5.  Has good water retention

6. Large-scale reduction of wall hollowing and cracking, reducing maintenance costs and reducing construction waste

7. The thickness of the construction is 5-10mm, reducing the load on the building and increasing the indoor space.

Technical Parameters:

Executive standard: GB/25181-2010GB/T20473-2006

Bulk density (kg/m2): ≤1000

Dry density / kg / m3: ≤ 1200

Water retention rate%: ≥94

28d shrinkage (%): ≤ 0, 2

Compressive strength (MPa): ≥ 2, 5

Quality loss after freezing and thawing (D15)%: ≤5

14d tensile bond strength (MPa): ≥ 0, 3

Strength loss after freezing and thawing (D15)%: ≤25

High-precision ALC block, aerated plate, plaster-free clay Bs023G

Yi Shimei High-precision ALC plaster-free mortar is a fine thin layer (2-3mm) batch scraping material for high-precious aerated concrete blocks and aerated concrete sheets. It is made of high-quality cement, selected fine aggregate and polymerized. The cement-based dry powder material with reasonable proportion of additive is directly used for thin layer leveling treatment of high-precision aerated blocks and plates, with good adhesion, crack resistance and water retention, excellent construction performance, one-time The construction thickness can be 2-3mm, it can be polished, and the interior wall paint can be directly painted on the batch scraping surface.

Performance characteristics:

1. Good material workability, excellent construction performance, and quick improvement of work efficiency

2. Has a strong adhesion

3. Has good water retention

4. Strong crack resistance, no air cracking

5. Construction thickness 2-3mm, to meet the requirements of no plastering

Technical Parameters:

Grinding: hand-polished

Drying time H: ≥ 2

Water resistance: no blistering, cracking and obvious powder loss for 48h

Bond strength MPa (standard state): ≥ 02

Packaging and storage: 33, 4KG / bag

Insulation system: 1 thermal insulation coating system; 2 inorganic vitrified microbead insulation mortar; 3 rubber powder polyphenyl granule mortar; 4 external wall insulation system (EPS polystyrene board / XPS extruded board).