EasyPlas Ordinary Tile Adhesive is made of cement, selected fine aggregate and polymer additives. It is an ideal tile bonding mortar. Applicable to indoor and outdoor, bathroom, kitchen wall, all kinds of materials with water absorption rate greater than 10% ceramic brick, small size natural stone and ceramic mosaic.

Performance characteristics:

◇ Simple construction, no need to wet the tiles, and improve work efficiency;

◇ Applying a thin layer, the dosage is small and uniform, which is safer and firmer than the traditional cement mortar sticking method;

◇ Strong adhesion and water resistance, can be used in bathrooms and kitchens;

◇ Low shrinkage, avoiding empty drum cracks;

◇ The surface is condensed for a long time, and the tile can be adjusted.

Technical parameters:
(GB/T 25181-2010)

Project

Tensile bond strength

Tensile bond strength after immersion

Tensile bond strength after standing for 10 minutes

Ceramic tile corresponding index

≧0.8MPa

≧0.5MPa

≧0.5MPa

※ Applicable to: BIII type ceramic tiles in GB/T4100-2006 standard;

Note: The test uses the corresponding water absorption rate of Vanke collection ceramic tile samples as test bricks, test operation basis.

"Premixed mortar" GB/T 25181-2010.